Wednesday, September 22, 2021

How do I Set Up My Netgear Orbi Router in AP Mode?

Netgear Orbi Router in AP Mode: Do you want to set up your Netgear Orbi router in AP mode? If the answer to the question is yes, then pat yourself on the back because you made the right decision. In the access point mode, your Netgear Orbi device will act as a gateway for other devices to connect to. Also, setting up your Orbi in the AP mode will extend the range of your existing wireless network. Isn’t it wonderful? Of course, it is! I didn’t tell you to pat your back for no reason!

Now, let’s get down to business. Considering that you want to set up your WiFi device in AP mode, follow the step-by-step guidelines mentioned in this post. But, before you do that, make sure that your device is connected to a blazing-fast internet connection. Or else, you won’t successfully be able to set up your WiFi device in AP mode.

Netgear Orbi Router in AP Mode

  1. Connect Your Orbi Router and Modem

Start by configuring the hardware of your Netgear Orbi router. Securely connect your Orbi router and the existing modem. If you are thinking about connecting your devices wirelessly, it is recommended that you don’t. Why? Well, because you can’t rely on a wireless source when it comes to connecting devices. There’s always a possibility that the connection might get lost.

So, what to do?

Make use of an Ethernet cable to connect your Orbi router and modem. But, before you use a cable, make sure that it isn’t worn out. In case it is, then replace the cable with a new one in the blink of an eye.

  1. Open Up an Updated Web Browser

Once a strong connection between your devices is established, open up a web browser on your PC. You are free to use Google Chrome, Mozilla Firefox, Apple Safari, or Microsoft Edge. No matter what web browser you use, make sure that it is up-to-date. Otherwise, you’ll face unnecessary technical issues while performing Orbi Netgear login.

Additionally, clear the cache, cookies, and browsing history of the web browser you are using.

  1. Access the Orbilogin.net Web Page

Type orbilogin.net in the address bar located in the top-left corner of your web browser. Click on the Enter button to visit the Netgear Orbi login page. Fill in the default username and password. If you aren’t certain regarding the admin details of your device, then refer to the Netgear manual. Clicking on the Log In button will take you to the Netgear Orbi setup wizard.

Note: If you aren’t able to log into your Netgear Orbi router by accessing orbilogin.net, then make use of 192.168.1.1 default router IP.

  1. Go to Advanced Setup

Now that you have accessed the Netgear Orbi setup wizard, go to the Settings option. Then, follow the instructions mentioned below to proceed further:

  • Click on Advanced > Advanced Setup > AP Mode.

  • The AP Mode page will display on your screen.

  • Select the AP mode radio option and click on the Enter button.

  • Select any of these options; ‘Use the fixed IP address’ or ‘Get dynamically from the existing router’.

Once you are done selecting the option of your choice, click on the Apply button, and wait for your changes to get saved.

Quick Tip: In case you face internet issues while trying to set up your Orbi router in AP mode, then it is recommended that you get in touch with your Internet Service Provider.

Conclusion

This was all about how to set up your Netgear Orbi router in AP mode. If this article helped you in setting up your device in AP mode successfully, then feel free to drop a word of appreciation in the comments section below.

Latest news

Related news

LEAVE A REPLY

Please enter your comment!
Please enter your name here