Sunday, September 26, 2021

Guidelines to Perform Netgear Orbi Voice Setup

Netgear Orbi Voice Setup: Are you looking for a way to set up your Netgear Orbi Voice to the Orbi router? If the answer to the question is yes, then congratulations! You have landed on the right post. Here, we have mentioned the step-by-step guidelines that’ll help you in setting up your Orbi Voice in Orbi Mode. So, wait no more and read on.

Netgear Orbi Voice Setup

You need to download the Netgear Orbi app on your mobile device. Thus, follow the steps outlined below to download the Netgear Orbi application on your phone:

  • If you are using an Android device, go to the Google Play Store. And, in case you are using an iOS device, then go to the Apple App Store.

  • Look for the Netgear Orbi app.

  • Once found, click on the Download button and wait for the application to get installed.

As soon as the application gets installed, log in to your account by accessing and follow the below-mentioned instructions:

Note: If you can’t log in to your account using orbilogin, then use default IP.

  • Place your Orbi Voice near the Netgear Orbi router.

  • Connect your Orbi Voice to a wall outlet but do not turn it on yet. In case after plugging the Orbi Voice into the power source, it automatically turns on, it is recommended that you turn it off.

Done? Good. Looks like you’re going correct so far. Now, change the mode on your Orbi Voice to Orbi Mode:

  • Locate the Sync button on your Netgear Orbi Voice.

  • Once found, press and hold the Sync button carefully.

  • While you are holding the Sync button, press and release the Power button. Do not release the Sync button yet.

  • Once your Orbi Voice powers on, wait for the LED light to pulse white.

  • The minute the LED gets stable, release the Sync button.

  • Now, go to the Netgear Orbi app and tap the Home icon.

  • Tap Add Satellite.

  • Now, follow the on-screen prompts to sync your Orbi Voice to your Orbi router.

And that’s it! In this manner, you can set up your Orbi Voice to your Netgear Orbi router.

How to Check if Your Netgear Orbi Voice is Synced to the Orbi Router?

The status of the LED light on your device will reveal whether your Netgear Orbi Voice has been synced to the Orbi router or not. For example:

White LED Light: If the LED is flashing white, then it means that your Orbi Voice is attempting to connect to the Orbi router.

Blue LED Light: Is the LED light flashing blue? If yes, then it means that the connection between your Orbi Voice and Netgear Orbi device is good.

Amber LED Light: In case the light is blinking Amber, then there’s bad news! It means that the connection between your devices is not that great. Thus, consider moving your Orbi Voice closer to your Orbi router.

Magenta LED Light: Oops! Connection failed. If the LED is blinking magenta, then the connection has failed. Thus, power off your devices, let them rest for some time, switch them on, and try to connect them again.

After completing the Netgear Orbi Voice setup, it is adviced that you change the location of your WiFi device.

The Bottom Line

This was all about connecting your Netgear Orbi Voice to the Orbi router. We hope that you enjoyed going through this article. If you did, then don’t hesitate to leave a word of appreciation in the comments section below.

Latest news

Related news


Please enter your comment!
Please enter your name here